I-P-200 P-260 P-320 I-PET Preform yokuBumba iSitofu seNkqubo yokuBumba

I-P-200 P-260 P-320 ye-PET Preform yokuBumba iSixokelelwano sokuBumba isitofu soMfanekiso oFakelweyo

Inkcazelo emfutshane:

Ukupholisa indawo yangaphakathi ye-preform ngaphandle kokusebenzisa uxinzelelo oluphezulu umoya oxinzelelweyo, ngokungafaniyo neenkqubo ezininzi zokupholisa emva kokubumba ezipholisa kuphela indawo yangaphandle.

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimbonakalo

Ukupholisa indawo yangaphakathi ye-preform ngaphandle kokusebenzisa uxinzelelo oluphezulu umoya oxinzelelweyo, ngokungafaniyo neenkqubo ezininzi zokupholisa emva kokubumba ezipholisa kuphela indawo yangaphandle.

2.Ukusetyenziswa komjikelo olungiselelweyo - ukufakwa kwiplaten ehambayo, inkqubo yokupholisa ihlala isebenza ngaphakathi kwe-85% yexesha lomjikelo jikelele.

3.Umthamo we-PET yokubumba i-injection system isuka kwi-230 ukuya kwi-320 tonnes (2000KN ukuya kwi-3200KN), kwaye ifumaneka kwi-preform mold maximum kunye ne-96 cavities.

Iinkcukacha

UMZEKELO		IYUNITHI	P-200	P-260	P-320
Iyunithi yokutofa	I-Screw Diameter	mm	70	75	80
	Isikruru L/D Ratio		25	25	25
	Shot Volume	cm3	1016	1378	1689
	Isitofu Weight PET	g	1087	1474	1807
	Ireyithi yokutofa	g/s	482	496	605
	Uxinzelelo lokutofa	Mpa	105	127	130
	Isantya seScrew	rpm	110	120	120
IYunithi yokuBamba	Amandla okuQhwatha	kn	2000	2600	3200
	Ukuhambisa iPlate Stroke	mm	490	550	585
	Max.Mould Height	mm	540	580	720
	Min.Mould Height	mm	200	200	300
	Isithuba seeBar zokubophelela (W×H)	mm	530×530	580×580	660×760
	Amandla ejector	kn	80	126	180
	I-Ejector Stroke	mm	140	150	180
	Inombolo ye-Ejector	n	5	5	9
Abanye	Max.Pump Pressure	Mpa	16	16	16
	Pump Motor Power	kw	30	37	44
	Amandla okufudumeza	kw	28	32	37
	(L×W×H)Ubungakanani	M	6×1.5×1.6	6.8×1.6×1.8	7.7×1.8×2
	Machine Weigh	T	7	8.5	13